If your water heater stops producing warm water resetting. The recommended temperature setting of any water heater is 120 degrees Fahrenheit.

Electric Water Heater Red Reset Button Tripping Troubleshooting Guide

One of the reasons why the reset button trips is when the thermostat has failed and got locked in the ON position making one of the heating elements heat water all the time.

Water heater reset button keeps tripping. If the water in the tank gets hotter than 180 degrees the reset button will trip. This helps protect you from getting burned or scalded by the excessively hot water. Heres the most likely problem.

But immediately the water heater. OK but then whats causing the water in your water heater to get so hot. So when the water reaches the high limit temperature the reset button trips.

This means the heating element is still working and will continue to increase the water temperature eventually tripping the reset button. It could be alarming to think that the water in your heater is dangerously hot. What causes hot water heater reset button to trip.

When a water heater starts tripping the ECO repeatedly its time to call a plumber for service. The most likely cause of the limit switch tripping is a bad thermostat. In other words water that is too hot will cause your water heaters reset button to trip.

However if the reset button on your water heater keeps tripping and is always needing to be reset then there could be a problem and its best to call a plumber. The reset button is actually part of your upper thermostat. So you go and reset the circuit breaker.

To reset it youll need to press the red reset button on the ECO which is usually attached to the upper thermostat. The water inside the tank may become dangerously hot for many reasons but most often a failed component is to blame. One for each element.

When the water reaches 180 the limit switch a little red reset button on the water heater trips. A thermostat that does not open allows the element to operate continuously thus raising the temperature. A damaged element is also a safety hazard depending on the cause and how hot the temperature reaches in the water heater.

Both problems are able to be solved but its important to note that figuring out which is causing the issue may not be easy. I take off the cover and remove the insulation to click the reset button and it is good for another 2 days. Then after a few minutes it happens again.

Hot Water HeaterKeeps Tripping Reset Button There are some things that can cause this problem. This can cause it to perform less effectively and continually trip regardless of the temperature of the water in the tank. A thermostat that is stuck closed may be the cause of the reset button tripping repeatedly.

The water in your water heater is getting too hot. And when you have to reset the heater its time to call a professional to service it. The ECO switch is a failsafe component that automatically shuts down the water heater when it overheats the water.

The reset button is sometimes referred to as the ECO emergency cut off or high limit switch. This temperature cannot cause scalding but its hot enough to prevent bacterial. The water will keep overheating and you will experience repeated occurrences of the reset button tripping.

When the water temperature in your water heater exceeds 180 the red reset button also known as the high-limit switch trips. Has this ever happened to you. The reset button is located on top of the emergency cut off ECO.

This safety feature serves the purpose of preventing you from being severely burned when you turn on the hot water. The reset button on a water heater is an important safety feature. Just like all parts of the water heater the reset button will eventually suffer from wear and tear.

So you reset it again. If the button is lit up it means the switch tripped and needs to be reset. What To Check When Youre Having Hot Water Problems The first thing you should check is the water heaters reset switch which is usually a red button on the upper thermostat of an electric water heater you will need to remove the small panel to access it.

Why the reset button keeps tripping Thermostat has failed. Hi my hot water heater is only 3 years old and it has dual heating elements and sensors. Water heaters with two elements have two thermostats.

The water in the water heater is getting too hotwhen the water has reached 1800 it will reset automatically because it will protect you from burning your skin. First off your electric water heater can actually trip 2 different safety features. This tripping protects you from getting scalded or burned when using hot water in your home.

To reset it youll need to press the red reset button on the ECO which is usually attached to the upper thermostat. How a bad thermostat causes your water heater reset button to trip. The most likely cause is a bad thermostat.

If your water heater is tripping the ECO repeatedly there is likely a problem with the system that needs to be repaired immediately. When a water heater starts tripping the ECO repeatedly its time to call a plumber for service. The top one has a reset button and about every 2 days it keeps tripping usually at night because I will get up for work and the water will be cold.

Other Reasons for a Hot Water Heater Reset Button to Trip. Your water heater trips the circuit breaker in your house. A red button located on the water heater itself just above the thermostat that trips when the water temperature exceeds 180 F.